Filter By:
- Parts & Accessories (73)
- Hubs (5)
- Spokes (4)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels
Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks.
-Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs
-100 mm front hub spacing only
-CNC-machined AL-6061
Pawl and spring service kit for all Ritchey wheels and hubs V4 and up.
Authentic service bearing kit for Ritchey mountain bike and road wheels.
- Bearing service kit for Phantom Flange rear hubs Includes #6903 (x1pc) & #699 (x1pc)
Authentic service bearing kit for Ritchey mountain bike and road wheels.
- Bearing service kit for 2-piece rear road hubs
Authentic service bearing kit for Ritchey mountain bike wheels.
- Replacement bearings for Vantage V1 non-2pc hubs
These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer.
- Sold in pairs
- Manufactured from 303 Stainless Steel
- Includes stainless steel hardware for attaching to axle
- Green colored spoke prep remains pliable for adjustments
- Helps keep spoke nipples from loosening
276mm Straight-Pull External for Roam 40 and Rail 40 Wheels, 3-pack
281mm Bladed Straight-Pull External Black Roam 50 27.5 Wheels, 3-pack
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints
- Shimano model # CJ-S7000
- Does not include cable fixing bolt unit
- OEM cassette joint unit for Alfine SG-S7000-8
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock.
- Improves tension consistency and overall build quality
- Prevents spoke wind up
- Offers secure thread lock between spoke and nipple
- Prevents corrosion between spoke and nipple
- Can be used dry or as a slurry
- Works great with mechanically locking nipples
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
- Variable widths
- Left: 30.5mm
- Center: 52mm
- Right: 30.5mm
- Length: 113mm
- Overall: 134mm
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 32mm
- Length: 116mm
- Overall: 137mm
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 36mm
- Length: 120mm
- Overall: 141mm
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 35mm
- Length: 119mm
- Overall: 140mm
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 37.5mm
- Length: 121.5mm
- Overall: 142.5mm
- Variable widths
- Left: 35mm
- Center: 52mm
- Right: 39mm
- Length: 126mm
- Overall: 147mm
- Variable widths
- Left: 35mm
- Center: 52mm
- Right: 40.5mm
- Length: 127.5mm
- Overall: 148.5mm
- Variable widths
- Left: 28mm
- Center: 52mm
- Right: 28mm
- Length: 108mm
- Overall: 129mm