Filter By:
- Parts & Accessories (73)
- Hubs (5)
- Spokes (4)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels
Replacement axles for MX-2000 hubs.
Size: 14 x 100 x 165mm
- Supplier Part: KT-M18F
- MPN: 370666
- Front/Rear: Front
- Diameter: 14mm
- OLD: 100mm
Size: 14 x 110 x 180mm
- Supplier Part: KT-389R
- MPN: 370668
- Front/Rear: Rear
- Diameter: 14mm
- OLD: 110mm
Size: 3/8-inch x 100 x 165mm
- Supplier Part: KT-M17F
- MPN: 370667
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 180mm
- Supplier Part: KT-M88R
- MPN: 370682
- Front/Rear: Rear
- Diameter: 14mm slotted for 3/8-inch
- OLD: 110mm
Replacement axles for Black Ops MX-1100 hubs.
Size: 3/8-inch x 100 x 140mm
- Supplier Part: KT-576F
- MPN: 370664
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 152mm
- Supplier Part: KT-5V3R
- MPN: 370665
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
Replacement axles for Black Ops MT-3100 hubs. Bearing shoulder to bearing shoulder is 59mm.
Size: 3/8-inch x 100 x 140mm
- Supplier Part: KT-M37F
- MPN: 370685
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 175mm
- Supplier Part: KT-M98R
- MPN: 370686
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 40mm
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 63mm
Developed for short spokes with a large deflection angle.
DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use.
- Weight: starting at 59g for 64 nipples.
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 73mm
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples
- 10mm axle holes for mountain bike applications
- 14mm axle holes for BMX applications
- Heavy duty steel protects frame, tensions chain
- M8 threading, Nylock nut
- 14 gauge forged 7075 alloy with CNC finish
- Matches Halo and Gusset anodized colors perfectly
- Sold in bags of 50
- length: 12mm
- Precision CNC machined 6061 aluminum axle nuts
- Compare stock steel nuts at 44 grams versus alloy nuts at 16 grams
- 15 x 100mm thru-axle endcaps for Spin Doctor 6F (front)hub
- 20 x 110mm thru-axle endcaps for Spin Doctor 6F (front hub
- Conversion kits for Spin Doctor 6-Drive hubs are not compatible with original Spin Doctor and Spin Doctor Pro hubs
- Non-quick release design for added security
- Alloy anchor nut includes Anti-Spin tab which prevents unwanted turning of nut when tightening or loosening the hex through-bolt
- XL version compatible with thicker dropouts (up to 10mm thick)
- Torque to 7 N
- Wheel: front/rear
- Spacing (front/rear): 100/135mm
- Shaft: Chromoly
- Front axle conversion, 15mm thru-axle, Wide Boy
- Conversions for fitting a Wide Boy hub onto either a 15mm or 20mm thru-axle fork
- Rear axle conversions for Spin Doctor Pro rear hub
- Various replacement axles and conversion kits for Spin Doctor and Spin Doctor Pro hubs
- Some conversions utilize pre-existing axle components for retrofit
- Conversion kits for original Spin Doctor and Spin Doctor Pro hubs are not compatible with Spin Doctor 6-Drive hubs
- Rear axle replacement kit, 10mm nutted, DJD-SupaD
- Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible
- DJD and DJD-BD parts are generally not cross compatible
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.
Replacement axle sets for use with Origin8 FB-2000 hubs
Front Axle:
- 3/8 x 26 x 135 x 175
Rear Axle:
- 3/8 x 26 x 170 x 210
- Small parts for the Origin8 MT-1110 Elite Series MTB Single Speed rear hub
- Spacing / Axle: 1s MTB
- Aluminum alloy shells resist corrosion and provide lightweight longevity
- Sealed cartridge bearings offer smooth operation while resisting contaminants
- 20mm Thru Axle with 15mm option, 6 bolt disc compatible
Origin-8's Torq Lite Track Cog Lock Ring 1.29" x 24 tpi with left-handed threaded thread is the only lock ring you need. Hardened threading and extra material make this highly durable to help you go the distance.
- AL6061 alloy tubeless Presta valve
- Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim
- Removable valve core for installing sealant
- Additional replacement valve cores sold separately
- Sold individually
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.
Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks.
-Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs
-100 mm front hub spacing only
-CNC-machined AL-6061
Pawl and spring service kit for all Ritchey wheels and hubs V4 and up.
Authentic service bearing kit for Ritchey mountain bike and road wheels.
- Bearing service kit for Phantom Flange rear hubs Includes #6903 (x1pc) & #699 (x1pc)
Authentic service bearing kit for Ritchey mountain bike and road wheels.
- Bearing service kit for 2-piece rear road hubs
Authentic service bearing kit for Ritchey mountain bike wheels.
- Replacement bearings for Vantage V1 non-2pc hubs
These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer.
- Sold in pairs
- Manufactured from 303 Stainless Steel
- Includes stainless steel hardware for attaching to axle
- Green colored spoke prep remains pliable for adjustments
- Helps keep spoke nipples from loosening
276mm Straight-Pull External for Roam 40 and Rail 40 Wheels, 3-pack
281mm Bladed Straight-Pull External Black Roam 50 27.5 Wheels, 3-pack
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints
- Shimano model # CJ-S7000
- Does not include cable fixing bolt unit
- OEM cassette joint unit for Alfine SG-S7000-8
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock.
- Improves tension consistency and overall build quality
- Prevents spoke wind up
- Offers secure thread lock between spoke and nipple
- Prevents corrosion between spoke and nipple
- Can be used dry or as a slurry
- Works great with mechanically locking nipples
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
- Variable widths
- Left: 30.5mm
- Center: 52mm
- Right: 30.5mm
- Length: 113mm
- Overall: 134mm
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 32mm
- Length: 116mm
- Overall: 137mm
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 36mm
- Length: 120mm
- Overall: 141mm
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 35mm
- Length: 119mm
- Overall: 140mm
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 37.5mm
- Length: 121.5mm
- Overall: 142.5mm
- Variable widths
- Left: 35mm
- Center: 52mm
- Right: 39mm
- Length: 126mm
- Overall: 147mm
- Variable widths
- Left: 35mm
- Center: 52mm
- Right: 40.5mm
- Length: 127.5mm
- Overall: 148.5mm
- Variable widths
- Left: 28mm
- Center: 52mm
- Right: 28mm
- Length: 108mm
- Overall: 129mm
Page 1 of 2
Next page